Showing posts with label Dynamics of Machine (DOM). Show all posts
Showing posts with label Dynamics of Machine (DOM). Show all posts

Definitions



1. Periodic motion –A motion which repeats itself after equal intervals of time is known as periodic motion. Any periodic can be represented by function x(t) in the period T, the function x(t) is called periodic function

2. Time Period – Time taken to complete one cycle is called periodic function.

3. Frequency –The number of cycles per unit time is known as frequency

4. Natural frequency – When no external force acts on the system after giving it an initial displacement , the body vibrates. These vibration are called free vibrations and their frequency as natural frequency. It is expressed in c/s or hertz

5. Amplitude – The max displacement of a vibrating body from its equilibrium position is called amplitude

6. Fundamental mode of vibration – The fundamental mode of vibration of a system is the mode having the lowest natural frequency

7. Resonance – When the frequency of external exitation is equal to the natural frequency of a vibrating body, the amplitude of vibration becomes excessively large. This concept is known as resonace

8. Mechanical System – The system consisting of mass shiftness and damping are known as mechanical system.

9. Continuous and Discrete system – Most of mechanical system include elastic members which have infinite number of degree of freedom. Such system are called continuous system or distributed system. Eg. Cantilever,Simply Supported beam System with finite number of degrees of freedom are called discrete system

10. Degree of freedom – The minimum no. of independent co-ordinates required to specify the motion of a system at any instant is known as degree of freedom of the system

11. Simple harmonic motion – A periodic motion of a particle whose acceleration is always directed towards the mean position and is proportional to its distance from the mean position is known as SHM. It may also defined as the motion of a projection of a particle moving round a circle with uniform angular velocity on a diameter.

12. Phase difference – the angle between two rotating vectors representing simple harmonic motion of the same frequency







Mechanical Vibration

The study of vibration is concerned with the oscillatory motion of bodies and the forces associated with them. All bodies possessing mass and elasticity are capable of vibrating. Thus most engineering machines and structures experiences vibration to some degree. Undesirable vibration in machines may cause the loosening of parts

Cause of vibration
1. Unbalanced forces –within machine itself,non-uniform material distribution
2. Dry friction between the two mating surfaces
3. External Excitation
4. Elastic nature of the system
5. Earth Quakes
6. Winds


Effect of vibration
• Excessive stress
• Undesirable noise
• Loosening of parts
• Partial or complete failure of parts



Uses
• Musical instruments
• Vibrating screen
• Shakers
• Stress relieving


Methods to reduce vibration
1. Removing the cause of vibration
2. Putting in screens if noise is the only objection
3. Resting the machinery in proper type of isolators
4. Shock Absorbers
5. Dynamic vibration absorber

Types of Damping

Viscous Damping

It is encountered by bodies moving at moderate speed through liquid. This type of damping leads to a resisting force proportional to the velocity. The damping force

Fd ∞ dx/dt

Fd =cx


‘c’ is the constant of proportionality and is called viscous damping Co-eff. With the dimension of N-S/m

Colomb Damping

This type of damping arises from sliding of dry surfaces.The friction force is nearly constant and depends upon the nature of sliding surface and normal pressure between them as expressed by the equation of kinetic friction

F = µN

Where µ =co-eff of friction

N = normal force

Solid or structural Damping

This is due to internal friction within the material itself.Experiment indicates that the solid damping differs from viscous damping in that it is independent of frequency and proportional to maximum stress of vibration cycle.

Slip or Intrefacial damping

Energy of vibration is dissipated by microscopic slip on the interfaces of machine parts in contact under fluctuating loads. Microscopic slip also occurs on the interface of the machine elements having various types of joints. This type is essentially of a linear type.